Khadas Edge2 Active Cooling Kit Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This khadas edge2 review focuses on the Active Cooling Kit designed for the Edge2 Maker Kit. It includes an Edge heatsink and a 3705 cooling fan to manage thermal output. The kit measures 3.15 inches in length, 1.18 inches in width, and 0.39 inches in height. You receive thermal pads and four CM2 x 4.5 screws for installation. Note that this 3705 fan is not compatible with the Khadas Edge SBC due to short wiring. This accessory ensures your single-board computer stays within safe operating temperatures during sustained workloads.
What stands out
- Includes a 3705 cooling fan for active thermal management
- Compatible specifically with the Edge2 Maker Kit
- Compact dimensions of 3.15 x 1.18 x 0.39 inches
- Comes with off-white thermal pads and installation screws
Who it fits
Good fit for
This kit suits users running the Edge2 Maker Kit who need reliable heat dissipation. If you plan to push your processor hard with sustained tasks, the active fan helps prevent throttling. The included thermal pads and screws make installation straightforward. You should choose this if you want a dedicated cooling solution that fits the specific form factor of the Edge2. It is ideal for embedded projects where thermal stability matters.
Who should skip it
Avoid this if you own the standard Khadas Edge SBC. The included 3705 cooling fan has wires that are too short for that specific board. You will need to find a different fan or cooling method. Also, skip this if you prefer passive cooling only, as this kit relies on an active fan. It is not a universal accessory for all Khadas boards. Check your specific board model before purchasing to ensure physical compatibility.
Verdict: This kit provides essential active cooling for the Edge2 Maker Kit. It is a practical solution for maintaining stable performance under load.
Khadas Edge2 Kit Specs
Model: KAHS-E-F02
This model number identifies the specific active cooling kit designed for the Edge2 Maker Kit. You should verify this code before purchasing to ensure compatibility with your hardware. Using the correct model prevents fitment issues and ensures the included thermal pads and screws align properly with the Edge2 SBC. This identifier helps you compare this kit against other Khadas cooling solutions to find the right match for your build.
Length: 3.15 inches
The kit extends 3.15 inches along one axis. You need to measure your case interior to ensure this length fits without obstructing other components or the case walls. This dimension is critical for small form factor builds where space is tight. Compare this length with your chassis specifications to confirm there is adequate clearance for airflow and installation without crowding nearby parts.
Width: 1.18 inches
The unit is 1.18 inches wide. This narrow profile allows it to fit into compact enclosures that might not accommodate larger cooling assemblies. You should check your case width constraints to ensure this kit does not interfere with side panels or adjacent hardware. This slim design is beneficial for users prioritizing minimal footprint in their mini PC setup.
Height: 0.39 inches
The cooling assembly stands 0.39 inches tall. This low profile is essential for low-profile cases or when stacking components vertically. You must verify that your case height clearance exceeds this measurement to avoid physical contact with the lid or other internal parts. This dimension helps you determine if the kit fits within your specific chassis height limitations.
Includes 3705 Cooling Fan
The kit comes with a 3705 model fan, which provides active airflow to dissipate heat from the heatsink. You benefit from this included component as it eliminates the need to source a compatible fan separately. Note that this fan is specifically designed for the Edge2 Maker Kit and may not fit other Khadas models due to wire length. This ensures optimal thermal performance for your specific board.
Physical Design and Build Quality
The Khadas Edge2 Active Cooling Kit measures 3.15 inches in length, 1.18 inches in width, and 0.39 inches in height, according to the listing. These dimensions define the physical footprint you must accommodate within your case or enclosure. The compact size ensures it fits alongside the Edge2 Maker Kit without obstructing adjacent components. You should verify your available space before installation, as the heatsink and fan assembly occupies a specific volume. The model number KAHS-E-F02 identifies this exact configuration, helping you avoid fitment errors with incompatible boards.
The kit includes an Edge heatsink paired with a 3705 cooling fan. This combination is engineered to manage thermal output for the Edge2 Maker Kit. The listing notes that the 3705 Cooling Fan cannot be mounted on the Khadas Edge SBC because the wire is too short. This detail is critical for your setup, as using the wrong board will prevent proper installation. You must ensure your hardware matches the specified compatibility list to avoid wasted effort.
Inside the box, you receive one active cooling kit, one off-white thermal pad, an instruction card, and four CM2 x 4.5 screws. The thermal pad facilitates heat transfer between the processor and the heatsink. The included screws secure the assembly firmly to the board. The instruction card provides guidance for proper placement. These components work together to maintain stable operating temperatures. You should follow the provided instructions closely to ensure correct alignment and secure mounting for reliable performance.
Setup and Everyday Use Guide
Installing this cooling kit requires careful attention to compatibility. The listing specifies that it is designed for the Edge2 Maker Kit. You must verify this match before installation. Using the kit with other boards, such as the Khadas Edge SBC, is not recommended. The included 3705 cooling fan has a wire that is too short for that specific single-board computer. This physical limitation prevents proper mounting on incompatible units.
The package provides the necessary components for assembly. You receive one active cooling kit, which includes the heatsink and fan. A white thermal pad is included to transfer heat from the processor. An instruction card guides you through the application of the pad. Four CM2 screws, measuring 4.5 millimeters, secure the assembly. These fasteners are essential for maintaining stable contact between the thermal pad and the heatsink.
In daily use, the kit manages thermal output for the Edge2 Maker Kit. The 3705 fan provides active airflow to dissipate heat generated during operation. The compact dimensions allow it to fit within standard enclosures without excessive bulk. Proper installation ensures consistent performance under load. The thermal pad must be applied correctly to avoid hot spots. Following the provided instructions helps achieve optimal heat transfer. This setup supports reliable operation for tasks that generate significant heat. The active cooling solution keeps the system within safe temperature ranges during extended use.
Before You Buy This Kit
You need to confirm your board is the Edge2 Maker Kit. The listing notes the included 3705 fan has a short wire. It will not fit the standard Khadas Edge SBC. Check your specific model number against the KAHS-E-F02 code. You must also check your case space. The kit adds 0.39 inches of height. Ensure your enclosure has room for this extra bulk. You will need the four CM2 x 4.5 screws provided. Do not reuse old fasteners that might not align. Keep the off-white thermal pads clean. They transfer heat from the chip to the metal heatsink. Dust the fan blades regularly. Blocked airflow reduces cooling efficiency. This accessory is for specific small form factor builds. It does not replace the main computer. It supports the Edge2 system. Verify all physical dimensions before ordering. Mismatches are common with these compact parts.
Check before you buy
- Verify your board is the Edge2 Maker Kit.
- Check that your case allows 0.39 inches of height.
- Confirm the short fan wire fits your setup.
- Ensure you have the four included CM2 screws.
The product at a glance
Khadas Edge2 Active Cooling Kit
Best for: Edge2 Maker Kit thermal management
- Dimensions
- 3.15 × 1.18 × 0.39 inches
View on Amazon: Khadas Edge2 Active Cooling Kit Affiliate link
This is the active cooling solution for the Khadas Edge2 Maker Kit. It includes a 3705 cooling fan, thermal pads, and mounting screws. The kit measures 3.15 by 1.18 by 0.39 inches. It keeps the system cool during operation. You need this if your Edge2 runs hot. It does not fit the Edge SBC due to short wires.
Pros
- Includes 3705 cooling fan
- Contains off-white thermal pads
- Comes with four CM2 x 4.5 screws
- Compatible with Edge2 Maker Kit
Cons
- Fan wire is too short for Edge SBC
- Only fits the Edge2 model
- Requires separate purchase of the main board
Good fit if
- You own an Edge2 Maker Kit
- You need active cooling for your SBC
- You want a complete thermal solution
Skip if
- You have an Edge SBC
- You need a passive cooling option
- You are buying a complete computer
Verdict: Khadas Edge2 Active Cooling Kit is the correct thermal upgrade for Edge2 owners. It provides necessary airflow for the board. It is not suitable for other Khadas models.
Specifications side by side
| Spec | Khadas Edge2 Active Cooling Kit |
|---|---|
| Dimensions | 3.15 × 1.18 × 0.39 inches |
| Color | Edge2's Active Cooling Kit |
| Model | KAHS-E-F02 |
Frequently asked questions
Is the Khadas Edge2 Active Cooling Kit compatible with other Khadas boards?
No, this kit is not suitable for other Khadas models. The listing specifies it is designed exclusively for the Edge2 Maker Kit. You must verify your hardware matches this specific model to ensure proper fitment. Using it with other boards, such as the standard Edge SBC, will result in compatibility issues.
What components are included in the KAHS-E-F02 cooling kit?
The kit includes an Edge heatsink and a 3705 cooling fan. These components work together to manage thermal output for the Edge2 Maker Kit. The model number KAHS-E-F02 identifies this specific active cooling solution. You should check this code to confirm you are purchasing the correct assembly for your system.
How large is the active cooling kit physically?
The kit measures 3.15 inches in length, 1.18 inches in width, and 0.39 inches in height. These dimensions define the physical footprint you must accommodate within your case or enclosure. The compact size allows it to fit within the designated space for the Edge2 Maker Kit without requiring additional clearance.
Does the included fan have a long wire?
No, the listing notes that the included 3705 fan has a short wire. This specific wire length is part of the design for the Edge2 Maker Kit. It will not fit the standard Khadas Edge SBC due to this constraint. You must ensure your setup can accommodate this short cable length.
Is this cooling kit a thermal upgrade for Edge2 owners?
Yes, the Khadas Edge2 Active Cooling Kit is the correct thermal upgrade for Edge2 owners. It provides necessary airflow for the board to manage heat effectively. This upgrade is essential for maintaining optimal performance. It is not a general accessory but a specific thermal solution for this particular board.
What is the model number for this specific cooling kit?
The model number is KAHS-E-F02. This code identifies the specific active cooling kit designed for the Edge2 Maker Kit. You should verify this code before purchasing to ensure compatibility with your hardware. Using the correct model prevents fitment issues and ensures the included components match your system requirements.
Can I use this kit with the standard Edge SBC?
No, you cannot use this kit with the standard Edge SBC. The listing explicitly states it is designed for the Edge2 Maker Kit. The included 3705 fan has a short wire that will not fit the standard Edge SBC. You must confirm your board is the Edge2 Maker Kit before installation.