Radxa 25W PoE+ Module 5514 Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This radxa 25w poe module 5514 review looks at a power solution for single-board computers. The module delivers up to 25 watts of power over a single Ethernet cable. It measures 3.5 inches by 3.5 inches with a height of 0.5 inches. This compact form factor allows it to sit neatly alongside supported ROCK SBCs. The design eliminates the need for a separate power adapter. You get both data and power through one network connection. This setup simplifies cable management for embedded projects and IoT deployments.
What stands out
- Delivers up to 25W of power directly from a PoE+ switch or injector
- Compact dimensions of 3.5 x 3.5 x 0.5 inches fit space-constrained installations
- Connects via pin headers to compatible ROCK SBC PoE headers without soldering
- Transmits both data and power over a single Ethernet cable
Who it fits
Good fit for
This module suits users building embedded systems or IoT projects that require clean cable management. If you are using a compatible Radxa ROCK single-board computer, this module offers a straightforward plug-in setup. The PoE+ capability is ideal for installations where running a separate power cord is difficult or messy. You will appreciate the slim profile if you are working in tight spaces. It is a practical choice for network-connected projects that need reliable power delivery without extra bulk.
Who should skip it
You should look at another option if your single-board computer is not a Radxa ROCK model. The module is specifically designed for that ecosystem and may not fit or function with other brands. If you need more than 25 watts of power, this module will not suffice. Users who require a separate power supply for redundancy might find this integrated approach limiting. Additionally, if you are not familiar with PoE networking, you may need to ensure your switch or injector supports the required standard.
Verdict: The Radxa 25W PoE+ Module 5514 is a specialized power solution for Radxa ROCK SBCs. It simplifies installation and cable management for compatible single-board computer projects.
Key specs explained for this module
PoE+ power delivery up to 25W
This spec means the module draws power directly from a PoE+ enabled network switch or injector. You do not need a separate power brick for your single-board computer. This simplifies your setup by sending both data and electricity over one Ethernet cable. It is ideal for embedded systems or IoT projects where space is tight and clean cable management matters.
Compatible with Radxa ROCK SBCs
This module is designed specifically for Radxa ROCK single-board computers. It ensures seamless integration and reliable power delivery to your SBC projects. You can plug it directly into the compatible ROCK SBC PoE header. This compatibility guarantees that the power module works as intended with the hardware it supports without requiring additional adapters or complex wiring.
3.5 inches width
This dimension describes the horizontal span of the module. At 3.5 inches, it remains slim and lightweight. The compact form factor fits neatly alongside supported ROCK SBCs. It does not add significant bulk to your build. This size is practical for space-constrained installations where you need to minimize the footprint of your networking hardware.
3.5 inches length
This measurement indicates the depth of the module. Combined with its width, it creates a square footprint. The design allows for straightforward plug-in setup using pin header connectors. You avoid the need for soldering. This makes installation easy and keeps the overall profile low, which is helpful when stacking components or fitting into small enclosures.
0.5 inches height
This spec refers to the thickness of the PCB. At half an inch, the module is very low profile. It sits close to the single-board computer it powers. This slim height is crucial for maintaining a compact system. It prevents the power module from obstructing other components or making the final assembly too tall for standard cases.
Design and build details
The Radxa 25W PoE+ Module 5514 features a slim, lightweight printed circuit board design. According to the listing, this compact form factor measures 3.5 inches in width and length, with a height of just 0.5 inches. This small footprint allows the module to fit neatly alongside supported Radxa ROCK single-board computers. It does not add significant bulk to your setup. This physical size makes it suitable for space-constrained installations where every inch matters.
The module uses pin header connectors for installation. These connectors attach directly to the compatible ROCK SBC's PoE header. This design enables a straightforward plug-in setup. You do not need to perform any soldering to install the unit. This approach simplifies the integration process for your projects. The build focuses on ease of assembly and reliable physical connection.
This design supports simplified networking by enabling both data and power transmission over a single Ethernet cable. The streamlined cable management benefits embedded systems and IoT deployments. The physical construction prioritizes integration with specific hardware rather than standalone use. You should verify that your single-board computer has the required PoE header before proceeding. The module is not a universal power solution for all devices.
Setup and everyday use guide
Setting up this module is straightforward if you have the right hardware. The listing states it features pin header connectors that attach directly to compatible ROCK Single Board Computers. You align the headers and plug it in. There is no soldering required. This direct connection method keeps the assembly process simple and reduces the risk of damage during installation.
Once connected, the module integrates seamlessly with your ROCK SBC. It draws up to 25W of power directly from a PoE+ enabled network switch or injector. You connect a single Ethernet cable to the switch. This cable carries both data and power to the device. You do not need to find a nearby electrical outlet or install a separate power brick. This eliminates the need for extra cables and adapters.
For daily use, the slim, lightweight PCB design fits neatly alongside supported ROCK SBCs. The compact form factor means it does not add significant bulk to your setup. This is ideal for space-constrained installations. The simplified networking allows for clean cable management in embedded systems or IoT deployments. You get reliable power delivery without cluttering your workspace. The module handles the power transmission so you can focus on your project. It is a practical solution for network-connected projects where power access is limited.
Before you buy this module
You need a compatible Radxa ROCK single-board computer to use this module. The listing confirms it is designed specifically for these SBCs. Do not assume it works with other brands. You must also have a PoE+ enabled network switch or injector. Standard PoE switches may not provide enough power for the full 25 watts. Check your network hardware specifications carefully. Installation requires aligning pin headers. There is no soldering involved, which simplifies the process. However, you still need to ensure your ROCK SBC has the correct PoE header. Maintenance is minimal since there are no moving parts. Dust accumulation on the PCB could affect heat dissipation. This module fits well in space-constrained IoT deployments. It streamlines cable management by combining data and power. It is not a standalone computer. It is a power accessory. Consider your existing network infrastructure before purchasing. Verify that your switch supports the 802.3at standard for PoE+.
Check before you buy
- Verify your single-board computer is a Radxa ROCK model.
- Confirm your network switch supports PoE+ with 25W output.
- Check that your SBC has a compatible PoE header.
- Ensure you have an Ethernet cable for data and power.
The product at a glance
Radxa 25W PoE+ Module
Best for: Radxa ROCK SBCs in tight spaces
- Dimensions
- 3.5 × 3.5 × 0.5 inches
View on Amazon: Radxa 25W PoE+ Module Affiliate link
The Radxa 25W PoE+ Module 5514 delivers power and data over a single Ethernet cable. It draws up to 25W from a PoE+ switch, removing the need for a separate power adapter. The module measures 3.5 by 3.5 by 0.5 inches. It connects directly to compatible Radxa ROCK single-board computers via pin headers. This compact design suits space-constrained IoT projects and embedded systems requiring streamlined cabling.
Pros
- Delivers up to 25W of power over Ethernet
- Eliminates the need for a separate power supply
- Connects via pin headers without soldering
- Compact 3.5 x 3.5 x 0.5 inch form factor
Cons
- Limited to compatibility with Radxa ROCK single-board computers
- Requires a PoE+ enabled network switch or injector
- No mention of integrated surge protection
Good fit if
- You are building a space-constrained IoT deployment
- You use Radxa ROCK single-board computers
- You want to simplify cable management with a single Ethernet link
Skip if
- You need power delivery for non-Radxa single-board computers
- Your network switch does not support PoE+ standards
- You require a standalone power adapter instead of network power
Verdict: Radxa 25W PoE+ Module 5514 fits users deploying Radxa ROCK boards in tight spaces who want clean cabling. It is a specialized tool for specific embedded projects rather than a general-purpose power solution.
Specifications side by side
| Spec | Radxa 25W PoE+ Module |
|---|---|
| Dimensions | 3.5 × 3.5 × 0.5 inches |
Frequently asked questions
Does this module work with any single-board computer?
No, it is designed specifically for Radxa ROCK boards. The listing confirms it uses pin header connectors that attach directly to compatible ROCK Single Board Computers. You must have a matching Radxa board to use it. It will not fit other brands or general-purpose PCs without specific adapters.
What network hardware do I need to use it?
You need a PoE+ enabled network switch or an injector. The module draws power directly from these sources over a single Ethernet cable. Standard PoE switches may not provide enough wattage, so PoE+ support is required for the full 25W output.
How small is the Radxa 25W PoE+ Module?
It measures 3.5 inches in width and length, with a height of 0.5 inches. This slim, lightweight printed circuit board design allows for installation in tight spaces. The compact form factor makes it suitable for embedded projects where space is limited.
Is this a general-purpose power supply?
No, it is a specialized tool for specific embedded projects. It is not a general-purpose power solution for standard desktops or laptops. Its primary function is to provide clean cabling and power to Radxa ROCK boards in confined areas.
How is the module connected to the computer?
It attaches via pin header connectors that plug directly into the compatible ROCK board. You align the headers and plug it in. There is no external power brick needed, as the power comes through the Ethernet connection.
Can I use this module without an Ethernet cable?
No, the module delivers power over a single Ethernet cable. You must connect it to a PoE+ enabled network switch or injector. The design relies entirely on the network cable for both data and power delivery.